Page 21 of 35
Reference: 708052-1
Issue date: 23-Jul-2014
Revision: B
RESETTING THE OVERSPEED BRAKE
Power the hoist ↑ UP a few
inches, at the same time turning the
reset knob counter-clockwise until
the reset knob engages.
TESTING THE EMERGENCY STOP BUTTON
While running the hoist in either
direction, press the red Emergency
Stop Button.
The hoist should not run in either
direction.
To reset, pull button up.
TESTING THE CONTROLLED DESCENT FEATURE
Raise the hoist approximately
3 feet (0.9m).
Disconnect the power supply.
During this test, or when you are
actually using the controlled descent
feature, CAREFULLY pull the
Controlled Descent Lever,
making sure that the hoist does not
overspeed. The hoist should descend
at a slow, controlled speed.
CAUTION
If the overspeed brake trips while doing this test, the
controlled descent system is not working properly
and the hoist should not be used.
= Inspect
= Verify
=Perform process
