Page 24 of 35
Reference: 708052-1
Issue date: 23-Jul-2014
Revision: B
TESTING THE EMERGENCY STOP BUTTON
For routine ↑UP travel or ↓DOWN
travel of the hoist, rotate the ↑UP or
↓DOWN control switch. The switch
is spring loaded and returns to the off
position and applies the brake when
released. If the hoist does not stop right
away, press the Emergency Stop and the
Overspeed brake test button.
Unplug the electric supply plug from
the power source.
SAFETY NOTES
• DO NOT
operate the hoist if you hear unusual noises.
• DO NOT
operate the hoist if adjustments or repairs seem necessary.
• DO NOT
operate the hoist if any warning, operating, or capacity instructions are unclear,
missing, illegible, or damaged.
Report any problems to your supervisor and also notify the next operator when changing shifts.
Tag the hoist “DO NOT USE UNTIL REPAIRED.”
• NEVER
operate an electric hoist or any electrical equipment in an explosive atmosphere.
Explosive atmospheres exist around refineries, chemical plants, grain elevators, distilleries,
inside of silos, mines, or around coal handling equipment. This is not a complete list.
Consult an expert if you are in doubt about the safety of your immediate surroundings.
= Inspect
= Verify
=Perform process
Overspeed Brake
Test Button
↑Up / ↓Down
Operation Switch
Emergency Stop
Button
