4. LEVER ARM ADJUSTMENT
DONUT MAGNET
VELCROED SENSOR
ADJUSTMENT ARM
CLUTCH ARM
CLUTCH ARM HUB
4.1 ATTACHING THE ADJUSTMENT ARM TO THE SHOE:
4.1.1
LOOSEN NUT ON ADJUSTMENT ARM.
4.1.2
ADJUST LENGTH OF ADJUSTMENT ARM FOREARM
SO WHEN DOOR IS SHUT AND ARM IS ENGAGED
IN SHOE, THE CLUTCH ARM MAKES A 90 DEGREE
ANGLE TO WALL. IF NECESSARY, REPLACE
FOREARM WITH MODEL 2414 FOREARM
EXTENSION SUPPLIED IN THE BOX WITH THE
MODEL 2300JL.
4.1.3
BOLT THE ADJUSTMENT ARM IN THE CENTER
HOLE OF THE SHOE BRACKET.
4.1.4
TIGHTEN THE ADJUSTMENT ARM NUT.
4.1.5
LOOSEN THE SET SCREWS IN THE CLUTCH ARM
HUB. APPLY “LOCTITE BLUE” TO THE SET
SCREWS AND TIGHTEN SET SCREWS IN THE
CLUTCH ARM HUB.
4.1.6
VERIFY DONUT MAGNET IS MOUNTED TO THE
SIDE OF CLUTCH ARM THAT FACES THE
VELCROED SENSOR 1/8” FROM THE CLUTCH ARM
HUB, CENTERED ON THE ARM. THIS TRIGGERS
THE MOTOR TO SHUT OFF WHEN IN OPERATION.
90 DEGREES
ADJUSTMENT ARM NUT
SET SCREWS
U.S. Patent 7,418,800 B1 Power Access 2300JL REV 08-05-17 ©
7