2. DOOR STOP
2.1 DOOR STOP INSTALLATION
A HARD DOOR STOP MUST BE USED TO PREVENT THE DOOR FROM TRAVELING PAST 90 DEGREES WHEN OPENING.
A HINGE MOUNTED STANDARD DUTY DOOR STOP IS INCLUDED IN THE MODEL 2300JL PACKAGE. TO INSTALL THIS
DOOR STOP REMOVE THE HINGE PIN FROM THE TOP DOOR HINGE. REINSERT THE PIN WITH THE DOOR STOP IN
PLACE. ADJUST THE THREADED POST SO THE DOOR STOPS AT 90 DEGREES WHEN OPEN.
NOTE
: A HEAVY DUTY DOOR STOP (NOT INCLUDED) IS RECOMMENDED FOR HEAVIER DOORS.
2.1.1
REMOVE HINGE PIN
2.1.2
ALIGN DOOR STOP THROUGH HOLE
2.1.3
REINSERT PIN
2.1.4
ADJUST THREADED POST SO DOOR
DOES NOT OPEN PAST 90 DEGREES
U.S. Patent 7,418,800 B1 Power Access 2300JL REV 08-05-17 ©
5
WARNING: THE MODEL 2300JL WILL NOT OPERATE PROPERLY IF THE DOOR OPENS PAST 90 DEGREES.