CLOSE
ADJ
AUTO
CLOSE
8. ADJUSTMENTS
8.2 CLOSING ACTIVATION TIME:
TO ADJUST HOW LONG THE MOTOR
CONTINUES TO ROTATE WHEN CLOSING
THE DOOR, USE A SCREWDRIVER TO
ADJUST “
CLOSE ADJ
” ON THE CONTROL
BOARD. IT IS RECOMMENDED THAT YOU
ADJUST THIS TO HAVE THE MOTOR
CONTINUE TO OPERATE FOR TWO
SECONDS AFTER THE DOOR IS
COMPLETELY CLOSED. THIS WILL ENSURE
CONSISTENT REPEATABILITY. THE
CLUTCH OF THE LEVER ARM ENSURES
THAT EVEN IF THE DOOR IS SHUT OR ANY
OBSTACLE IS ENCOUNTERED, THE MOTOR
WILL NOT BURN ITSELF OUT. THE CLUTCH
TENSION CANNOT BE ADJUSTED.
8.1 OPEN DWELL TIME:
TO ADJUST HOW LONG THE DOOR STAYS OPEN
BEFORE CLOSING, USE A SCREW DRIVER TO
ADJUST “
AUTO CLOSE
” ON THE CONTROL
BOARD. TURNING CLOCKWISE WILL INCREASE
THE TIME THE DOOR STAYS OPEN. TURNING
COUNTERCLOCKWISE WILL DECREASE THE
DWELL TIME. THE DWELL TIME CAN BE
ADJUSTED FROM 0-30 SECONDS.
ROTATE CCW FOR
REDUCED MOTOR
ACTIVATION TIME
ROTATE CW FOR
INCREASED MOTOR
ACTIVATION TIME
ROTATE CW TO
INCREASE DWELL
TIME
ROTATE CCW TO
DECREASE DWELL
TIME
NOTE
: MAKE
ADJUSTMENTS BY
SMALL FRACTIONS
OF A TURN
MAIN CIRCUIT BOARD
U.S. Patent 7,418,800 B1 Power Access 2300JL REV 08-05-17 ©
13