Poulan Pro PR625Y22RHP Operator'S Manual Download Page 28

Page: 28 / 36

Belt

Drive

cover

PUSH

DOWN

Belt
keeper

Belt

Drive
cover

PUSH
DOWN

Pulley

TO REMOVE / REPLACE DRIVE BELT

FRONT WHEEL DRIVE MODELS:

“STANDARD” OR “DUAL BAIL” MODELS:
• Remove drive cover. Remove belt from

gearcase pulley by pushing down on
pulley and rolling belt off it.

• Turn lawn mower on its side. See

engine manual for proper direction of
turning over the engine.

NOTE

: Before tipping lawn mower to

remove drive belt, empty fuel tank by run-
ning engine until fuel tank is empty.
• Remove blade.
• Remove belt from engine pulley on

crankshaft.

• Install new belt by reversing above steps.

NOTE:

Always use factory approved belt

to assure fit and long life.

“AUTO WALK” or “VARI-SPEED” MODELS:
• Remove drive cover and belt keeper.
• Remove belt from gearcase pulley by push-

ing down on pulley and rolling belt off it.

• Turn lawn mower on its side. See

engine manual for proper direction of
turning over the engine.

NOTE

: Before tipping lawn mower to

remove drive belt, empty fuel tank by run-
ning engine until fuel tank is empty.

SERVICE AND ADJUSTMENTS

• Remove blade and debris shield.
• Remove belt from engine pulley on

crankshaft.

• Install new belt by reversing above steps.

NOTE:

Always use factory approved belt

to assure fit and long life.

MODELS WITH GEARCASE-MOUNTED
BELT KEEPER:
•  Remove drive cover and belt keeper.
•  Remove belt from gearcase pulley.
•  Turn lawn mower on its side. See

engine manual for proper direction of
turning over the engine.

NOTE

: Before tipping lawn mower to

remove drive belt, empty fuel tank by run-
ning engine until fuel tank is empty.
• Remove blade and blade adapter.
• Remove belt from pulley of blade

adapter.

• Install new belt by reversing above

steps.

NOTE:

Always use factory approved belt

to assure fit and long life.

Belt

Drive

cover

Belt

keeper

Gearcase

pulley

Blade
bolt

Crankshaft

keyway

Hardened
washer

Lockwasher

Blade adapter

Key

Blade

Trailing edge

Belt

retainer

Summary of Contents for PR625Y22RHP





































Search results

Summary of Contents for PR625Y22RHP

Reviews:

Related manuals for PR625Y22RHP

Brands by name

Popular brands

Poulan Pro PR625Y22RHP, Operator'S Manual

Search results

Summary of Contents for PR625Y22RHP

Reviews:

Related manuals for PR625Y22RHP

Brands by name

Popular brands