background image

18

OPERATOR PRESENCE CONTROL 
BAR (ALL MODELS)

Your lawn mower is equipped with an op-
 er a tor presence control bar which re quires 
the operator to be po si tioned behind the 
lawn mower handle in order to start and 
operate the lawn mower.

 

CAUTION:

  Federal reg u la tions require 

an en gine control to be in stalled on this 
lawn mower in order to min i mize the risk 
of blade contact injury. Do not un der 
any cir cum stanc es attempt to de feat the 
func tion of the operator con trol. The blade 
turns when the engine is running.

DRIVE CONTROL

“STANDARD” DRIVE CONTROL

•  Self-propelling is controlled by holding 

the operator presence control bar down 
to the handle and pushing the drive 
control lever forward until it clicks; then 
releasing the lever.

•  Forward motion will stop when the op-

erator presence control bar  is released.  
To stop forward motion without stopping 
engine, release the operator presence 
control bar slightly until the drive control 
disengages.  Hold operator presence 
control bar down against handle to 
continue mowing without self-propelling.

•  To keep drive control engaged when 

turning corners, push down on handle 
and lift front wheels off ground while 
turning lawn mower.

TO ENGAGE DRIVE CONTROL

Drive 
control

DRIVE CONTROL DISENGAGED

Operator 
presence 
control bar

OPERATION

“AUTOWALK” DRIVE CONTROL

•  Self-propelling is controlled by hold ing 

the operator presence control bar down 
to the handle and pulling the drive con-
trol lever(s) rearward to the handle.  The 
farther toward the handle the lever(s) 
are pulled, the faster the unit will travel.

•  Forward motion will stop when either 

the operator presence control bar or a 
drive control lever are released. To stop 
forward motion without stop ping engine, 
re lease the drive control lever(s) only. 
Hold op er a tor presence control bar 
down against handle to con tin ue mow-
ing without self-propelling.

NOTE:

 If after releasing the drive control the 

mower will not roll backwards, push the mower 
forward slightly to disengage drive wheels.

“DUAL BAIL” DRIVE CONTROL

•  To start forward motion, lift drive control 

bar up to handle.

•  To stop forward motion, release drive 

control bar.

DRIVE CONTROL ENGAGED

Operator 
pres ence 
con trol bar

DRIVE CONTROL DIS EN GAGED

Summary of Contents for PR625Y22RHP





































Reviews: