background image

30

Will not start

           1.   Out of fuel.                               1.   Fill fuel tank.

                                 2.   Engine not “CHOKED”             2.   See “TO START ENGINE” in 
                                       properly.                                         Operation section.
                                 3.   Engine fl ooded.                        3.   Wait several minutes before  
                                                                                             attempting to start.
                                 4.   Bad spark plug.                       4.   Replace spark plug.
                                 5.   Dirty air fi lter.                           5.   Clean/replace air fi lter.
                                 6.   Dirty fuel fi lter.                          6.   Replace fuel fi lter.
                                 7.   Water in fuel.                           7.   Empty fuel tank and carbure- 
                                                                                                  tor, refi ll tank with fresh gaso- 
                                                                                                  line and replace fuel fi lter.
                                 8.   Loose or damaged wiring.       8.   Check all wiring.
                                 9.   Carburetor out of adjustment.  9.   See “To Adjust Carburetor” in 
                                                                                             Service and Adjustments  
                                                                                             section.
                                 10. Engine valves out of                10. Contact our authorized 
                                       adjustment.                                    service center/department.

Hard to start

           1.   Dirty air fi lter.                           1.   Clean/replace air fi lter.

                                 2.   Bad spark plug.                       2.   Replace spark plug.
                                 3.   Weak or dead battery.             3.   Recharge or replace battery.
                                 4.   Dirty fuel fi lter.                          4.   Replace fuel fi lter.
                                 5.   Stale or dirty fuel.                    5.   Empty fuel tank and refi ll tank  
                                                                                             with fresh, clean gasoline.
                                 6.   Loose or damaged wiring.       6.   Check all wiring.
                                 7.   Carburetor out of adjustment.  7.   See “To Adjust Car bu re tor” in 
                                                                                             Service and Ad just ments  
                                                                                             sec tion.
                                 8.   Engine valves out of                8.   Contact our authorized 
                                       adjustment.                                    service center/department.

Engine will not 

      1.   Brake pedal not depressed.     1.   Depress brake pedal.

turn over

                 2.   At tach ment clutch is engaged.   2.   Disengage attachment clutch.

                                 3.   Weak or dead battery.             3.   Recharge or replace battery.
                                 4.   Blown fuse.                              4.   Replace fuse.
                                 5.   Corroded battery terminals.     5.   Clean battery terminals.
                                 6.   Loose or damaged wiring.       6.   Check all wiring.
                                 7.   Faulty ignition switch.               7.   Check/replace ignition switch.
                                 8.   Faulty solenoid or starter.        8.   Check/replace solenoid or  
                                                                                             starter.
                                 9.   Faulty operator presence         9.   Contact our authorized 
                                       switch(es).                                     service center/department.

Engine clicks but  

 1.   Weak or dead battery.             1.   Re charge or replace battery.

will not start

           2.   Corroded battery terminals.     2.   Clean battery terminals.

                                 3.   Loose or damaged wiring.       3.   Check all wiring.
                                 4.   Faulty solenoid or starter.        4.   Check/replace solenoid or  
                                                                                             starter.

Loss of power         

1.   Cutting too much grass/too      1.   Raise cutting height/reduce 

                                       fast.                                                speed.
                                 2.   Throttle in “CHOKE” position.  2.   Adjust throttle control.   
                                 3.   Build-up of grass, leaves and  3.   Clean underside of mower  
                                       trash under mower.                        housing. 

 

 

                                 4.   Dirty air fi lter.                           4.   Clean/replace air fi lter. 

PROBLEM                 CAUSE                                          CORRECTION 

TROUBLESHOOTING CHART: 

Summary of Contents for COGT22H48A


































Reviews: