manualshive.com logo in svg

Poulan Pro COGT22H48A, Owner'S Manual

Share
Download
Poulan Pro COGT22H48A Owner'S Manual Download Page 31

31

Loss of power

        5.   Low oil level/dirty oil.                5.   Check oil level/change oil.

(continued)

             6.   Faulty spark plug.                    6.   Clean and regap or change  

                                                                                             spark plug.
                                 7.   Dirty fuel fi lter.                          7.   Replace fuel fi lter.
                                 8.   Stale or dirty fuel.                    8.   Empty fuel tank and refi ll tank  
                                                                                                  with fresh, clean gas o line.
                                 9.   Water in fuel.                           9.   Empty fuel tank and car- 
                                                                                                  buretor, refi ll tank with fresh  
                                                                                                  gasoline and replace fuel fi lter.
                                 10. Spark plug wire loose.             10. Connect and tighten spark  
                                                                                             plug wire.
                                 11. Dirty engine air screen/fi ns.     11. Clean engine air screen/fi ns 
                                 12. Dirty/clogged muffl er.               12. Clean/replace muffl er.
                                 13. Loose or damaged wiring.       13. Check all wiring.
                                 14. Carburetor out of adjustment.  14. See “To Adjust Carburetor” in 
                                                                                             Service and Adjustments  
                                                                                             section.
                                 15. Engine valves out of                15. Contact our authorized 
                                       adjustment.                                    service center/department.

Excessive 

              1.   Worn, bent or loose blade.      1.   Replace blade. Tighten

 

vibration                                                                             

blade bolt.

                                 2.   Bent blade mandrel.                2.   Contact our authorized 
                                                                                             service center/department.
                                 3.   Loose/damaged part(s).          3.   Tighten loose part(s).
                                                                                             Replace damaged parts. 

Engine continues   

1.   Faulty operator-safety              1.   Check wiring, switches and  

to run when oper-

        presence control system.               connections. If not cor rect ed,

ator leaves seat      

                                                           contact our authorized 

with attachment      

                                                           service center/department.

clutch engaged

Poor cut - uneven   

1.   Worn, bent or loose blade.      1.   Replace blade. Tighten  

                                                                                             blade bolt.
                                 2.   Mower deck not level.              2.   Level mower deck.
                                 3.   Buildup of grass, leaves, and   3.   Clean underside of mower  
                                       trash under mower.                        housing.
                                 4.   Bent blade mandrel.                4.   Contact our authorized  
                                                                                             service center/department.
                                 5.   Clogged mower deck vent       5.   Clean around man drels to 
                                       from build-up of grass, leaves,         open vent holes. 

 

                                       and trash around mandrels.            

Mower blades will   

1.   Obstruction in clutch                1.   Remove obstruction.

   

not rotate                      

mechanism.

                                 

2.   Worn/damaged mower drive   2.   Replace mower drive belt. 

                                       belt.
                                 3.   Frozen idler pulley.                   3.   Replace idler pulley.
                                 4.   Frozen blade mandrel.             4.   Contact our authorized 
                                                                                             service center/department.

 PROBLEM                CAUSE                                        CORRECTION 

TROUBLESHOOTING CHART: 

Summary of Contents for COGT22H48A


































Reviews:

No comments

Brands by name

Popular brands

Load more brands