GB
ATTACHING TO THE TRACTOR
- 8 -
0400-GB Anbau_243
Distance (X) adjustment
(from 2004 model)
1. Attach machine to tractor and bring to working position (see
above).
2. Swing lever (H) up (90°)
3. Turn threaded spindle accordingly.
MULTITAST system (Optional extra)
- see chapter ”THE ”MULTITAST” SYSTEM” also
For machines without ”MULTITAST”
- turn threaded spindle until it stops
(X1 = 190 mm)
For machines with ”MULTITAST”
- turn threaded spindle to a distance of
X1 = 220 – 240 mm.
4. Swing lever (H) down (0°).
In this position the threaded spindle is secured against turning.
Hydraulic hoses and electrical cables
Note:
Overlengthed hydraulic hoses and electrical cables
are fitted to the machine. This enables the machine to be
coupled to various tractors
• Roll hydraulic lines and electrical cables together appropriately
and secure with cable binders (K).
• Rotating rotor must not damage hydraulic hoses and
electrical cables.
There must always be sufficient distance to the
rotating parts even when cornering.
• Observe lengths "L1 and L2"!
