drift to left
drift to right
7.Adjust Side Trim In Hover
Adjust the trim to right if the fuselage drifts to left when taking off, and vice versa.
(Figure 18)
Function of the Flyer
1.Take Off: Turn on the transmitter and then power on the drone, push the left throttle
to the utmostcontrol distance and then to the low end, release the throttle, the side
lights stop flash and stay solid, which indicates successful frequency pairing. Press
the start/landing button and the drone begin to fly.
2.Landing: Push the left throttle down to the end while flying, the drone will slowly flies
downwards to the ground until the motors stop rotating.
3.One key to landing: Press the Start/Landing button while flying, the drone will fly
down to the ground until the motors stop rotating.(Forbid to move the left throttle
when using the the one key to landing function or it will not take effect.
4.Immediate landing: Push the left throttle and right stick to internal angle of 45
degree at the same time when immediate landing is need in urgent condition
(Figure 19), the motors will stop rotating and the drone will fall to the ground directly.
(Please keep away from clowds while using the function, the drone may generate
some impact in the process of immediate landing.)
Variable Gain
Before flight,turn on the transmitter and press the Speed Adjustment button, the
transmitter will issue "beep" sound, the percentage displayed on the LCD will flash
(Figure 20), turn around it to left or right to adjust the speed(Figure 21),ch o o s e a
proper speed and press the button again, the percentage on the LED screen will stay
solid and the speed is set.Percentage below 50% will reduce the sensitivity of the
drone, starters are advised to set the speed percentage between 30% and 50% to
practice it. Percentage above 50% will increase the drone's sensitivity and its operation
difficulty,recommand not try speed percentage above 50% until you are completely
get the hang of it.
+
-
Flip Mode
Press flip mode button of the transmitter(Figure 22) when flying and the transmitter
will issue sound of "beep beep...”which indicates the drone enters flip mode. Push
the Left/Right/Forward/Back Flying Stick(Right stick) to left/right/forward/back(Figure 23),
the drone will do 360 degree flipping to corresponding direction synchronously.
13
14
Figure 18
Figure 19
Figure 20 Figure 21
Figure 22 Figure 23
