Headless Mode
By using headless mode, players are not needed to tell the front or rear of the drone
when operate it. Suitable for situations that the drone in sunshine or the drone over
a long distance and can not recognize the drone head and tail.The drone is set as
"head mode" by default.
Press the Headless button to enter the headless mode. While in Headless mode, no
matter which way the quad copter is facing, the right lever will move the quad copter
in the same direction the lever is being pushed - left for left, right for right, forward for
forward, or backwards for backwards - "Headless" mode. The controller will continue
to beep while in Headless mode.Press the Headless button again if you want to exit
the headless mode.
InstallationBlades
1.Remove the screws by counterclockwise rotate the screwdriver.
2.Upwards pull out the blades.
3.Install the blades with the same rotate direction,then tighten the screws by clockwise
rotate the screwdriver.
15
16
181/186DH
-
EN
Figure 24 Figure 25
Figure 26
C
1
D
1
F181Blades Installation
F186 Blades Installation
1. Put the blade changer to the base of the blades.
2.Push up the blades.
3.Put the new blades into its correct position.
.Make sure the blade be accordant with its rotate direction
F181 F186
