4
2 Begin pole assembly
Locate the two screws loosely
pre-installed at the pole joint.
Using the appropriate hex
wrench, remove them and set
them aside. Leave the other two
screws in place.
3 Assemble pole
Taking care not to strain the
cables, lay the pole out on the
floor (preferably on a rug or
similar soft surface). Insert the
lower half of the pole into the
upper half.
4 Connect pole halves
Make sure that the poles are
aligned correctly aligned,
using the notch and pin as a
guide. Reinsert and tighten
the bolts you removed in the
previous step.
