12
Center the scale
on the engraved lines
on the base
19 Place a scale
If you’re not using a scale,
skip this step.
If you’re using a scale, place it
on DimStation’s base. Center it
from side to side.
To locate your scale front-to-
back, find the small groove
engraved on both edges of
the base. Use this as the
front-to-back centering point
for your scale.
20 Attach the power cable
Attach the DimStation’s power
cable to the port labeled
“Input 24v.”
The other ports are used in
advanced configurations
covered in additional
documentation.
