IP410G and IP410C - User Manual
113
Upgrade
To upgrade software, this phone can be configured with a TFTP server where the new code image is located.
The TFTP upgrade can work in either static IP or DHCP mode using private or public IP address. It is
recommended to set the TFTP server address in either a public IP address or on the same LAN with the
phone.
To configure the TFTP server via the Web configuration interface
Input the admin password to enter the configuration screen. From there, enter the TFTP server address in the
designated field towards the bottom of the configuration screen. Once the TFTP server is configured, please
power cycle the phone.
TFTP process may take as long as 1 to 2 minutes over the Internet or just 20+ seconds if it is performed on a
LAN. Users are recommended to conduct TFTP upgrade in a controlled LAN environment if possible. For those
who do not have a local TFTP server, Positron provides a NAT-friendly TFTP server on the public Internet for
firmware upgrade.
Directory to configure local TFTP
1.
Unzip the file and put all of them under the root directory of the TFTP server.
2.
The PC running the TFTP server and the UC IP PHONE should be in the same LAN segment.
3.
Go to File
Configure
Security to change the TFTP server's default setting from "Receive Only" to
"Transmit Only" for the firmware upgrade.
4.
Start the TFTP server, in the UC IP PHONE’s web configuration page.
5.
Configure the Firmware Server Path with the IP address of the PC.
6.
Update the change and reboot the unit.