BRX Power Injector Installation Guide
33
180-0192-001-R01
EN 55022: 2010: Information technology equipment - Radio disturbance characteristics Limits and
methods of measurement
EN 55024: 2010: Information technology equipment - Immunity characteristics - Limits and methods of
Measurement
EN 55032: 2012: Electromagnetic compatibility of multimedia equipment - Emission Requirements
English
Hereby, Positron Access Solutions Corp. declares that the BRX Power Injector
models are in compliance with the essential requirements and other relevant
provisions of Directive 2014/30/EU and 2014/35/EU.
Français
Par la présente Positron Access Solutions Corp. déclare que les modèles BRX
Power Injector sont conformes aux exigences essentielles et aux autres dispositions
pertinentes selon les normes 2014/30/EU and 2014/35/EU.
Safety
The following BRX Power Injector models conforms to IEC 60950-1/UL 60950-1/CSA C22.2 #60950-1
and IEC 60950-22/UL 60950-22/CSA C22.2 #60950-22 standards:
BRX-PWR-8, BRX-PWR-16, BRX-PWR-24, BRX-PWR-8-AC, BRX-PWR-16-AC, BRX-PWR-
24-AC, BRX-PWR-8-A, BRX-PWR-16-A, BRX-PWR-24-A, BRX-PWR-8-G, BRX-PWR-16-G
and BRX-PWR-24-G
Les modèles BRX Power Injector suivants sont conformes aux normes IEC 60950-1/UL 60950-1/CAN
C22.2 #60950-1 et IEC 60950-22/UL 60950-22/CAN C22.2 #60950-22.
BRX-PWR-8, BRX-PWR-16, BRX-PWR-24, BRX-PWR-8-AC, BRX-PWR-16-AC, BRX-PWR-
24-AC, BRX-PWR-8-A, BRX-PWR-16-A, BRX-PWR-24-A, BRX-PWR-8-G, BRX-PWR-16-G et
BRX-PWR-24-G
Precautions and warnings
Be careful when splicing the BRX Power Injector pairs to the twisted telephone cable pairs.
Dangerous voltage can be present on the pairs. Splicing should be done by a qualified person. Never
splice pairs during a lightning storm.
The equipment must be connected to a protective ground in accordance with the instructions provided
in this manual. Always ensure that BRX Power Injector units are connected to a chassis ground path
of 25 ohms or less to avoid damage to the equipment from lightning strikes and other electrical
surges.
Use of this product in a manner other than defined in this installation guide may cause damage to
equipment or injury to personnel.
The BRX Power Injector products are intended for installation in Restricted Access Locations only
whether installed indoor or outdoor.
