background image

 

 

Part 2 

FEATURES 

 

Two - line LCD display with 20 characters per line. 

 

Dark blue character with yellow green back-light 

 

Easy viewing characters (6.0 mm by 9.66 mm) 

 

Display area 143 mm by 21 mm 

 

Euro dollar sign supported in USA/European font table 

 

Selectable command emulation modes including PST and EPSON 

command emulation modes 

 

Long life, trouble free and user friendly operation 

 

Composed of several members in the family for versatile 

applications as tabulated below 

 

MODEL NUMBERS 

 

 

 

INSTALLATION GUIDE 

POWER PREPARATION 

FOR PD-300, PD-300U: 

For these models of customer display it need to be powered by a separate 
power adaptor. Therefore there is no need for any operation in the POS host 
system. The power adaptor for PD-300 supplies 12VAC, the power adaptor for 
PD-300U can either be the 12V AC one or the + 24V DC power adaptor for 
Posiflex POS printer and to support the printer through use of on option 
cable.(P/N: 21863250900)  

FOR PD-302, PD-305, PD-306, PD-307, PD-308: 

For these models of customer displays to be used in Posiflex touch terminal 
systems, the internal jumpers of the touch system should be modified to 
provide 

+ 5 V DC 

power to the customer display through the specific 

Part 3 

Summary of Contents for PD-300 Series











Reviews: