background image

 

P/N: 

19640900000

 

1

LM4115 / TM4115 

LCD / Touch Monitor 

USER’S MANUAL 

Rev. : Original 

 

I.  FEATURES 

• 

Most stable touch monitor for industrial and commercial use 

• 

Application covers POS, POI (Kiosk), -Factory Automation etc. 

• 

High quality 15” TFT LCD panel with scaling function for full screen display 

• 

Spill proof and easy maintenance structure allowing easy cleaning 

• 

Tilt adjustable yet robust and wobble free construction 

• 

Recommended. LCD resolution: 1024 x 768  

• 

Slim featured from any excessive option for its predecessor 

• 

Resistive type extra long life touch panel 

• 

Touch functions include left/right button, double click, drag & drop (for TM4115 only) 

• 

Touch beep can be pitch adjusted and enabled/disabled by software control (TM only) 

• 

Connect to host through VGA and COM port  

FCC NOTICE

 

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to 
comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to 
provide reasonable protection against interference when operated in a commercial environment. Operation of this 
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to 
take whatever measures to correct the interference. 

WARRANTY LIMITS 

Warranty will terminate automatically when the machine is opened by any person other than the authorized 

technicians. The user should consult his/her deal er for the problem happened. Warranty voids if the user does not follow 
the instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or 
hazard caused by improper application. 

ABOUT THIS MANUAL

 

This manual  assists the user to utilize the  LCD Monitor LM4115 and  the  TOUCH Monitor TM4115. This 

product provides exquisite touch control capability over a stable and adjustable LCD monitor with minimal footprint. 

The manufacturer of the  LM4115 / TM4115 LCD / touch monitor heartily apologizes to the user for reserving 

the right to change or to modify this manual without notice due to the rapid and constant progress and improvement on 
science and technology. The user may always obtain the most up to date information through any of our web sites: 
http://www.posiflex.com.tw, http: //www.posiflexuk.com, http://www.posiflexusa.com. 

 Copyright  Posiflex Inc. 2004 

TRADE MARKS AND SERVICE MARKS  

POSIFLEX is a registered trademark of  Posiflex Inc.. 
Other brand and product names are trademarks and registered trademarks and service marks of their respective 

owners. 

Summary of Contents for LM4115












Reviews: