7
signal on resolution and refresh rate will be displayed at the bottom. Applicable
icons in the main menu and its subsequent menus are explained below.
“
MAIN MENU
”: There are in total 5 icons in this menu: One of the 5
icons will be displayed in inverted color to indicate its
relationship with the submenu below. Pressing “NXT” button will shift the
selected icon one by one from left to right and then wrap around to the most left.
Press “OSD” button to enter the selected sub menu. If there is no button for OSD
setting is pressed within a period of time (about 5 seconds to 1 minute as
programmed) the OSD window will disappear with all the adjusted parameters
saved. Explanations on items in sub menu are as below.
“BRIGHTNESS / CONTRAST ADJUST SUBMENU”:
There are 3
icons in this submenu:
Press “OSD” button to select item or return to
main menu. Press “NXT” button to select among brightness, contrast and exit.
“BRIGHTNESS ADJUST”:
When this item is selected, there will
be only the brightness icon with an adjustment indication bar under it
between the main menu area and the video signal mode. Press “+” button
to increase brightness. Press “-” to decrease. Press “OSD” button to save
the current setting and return to “Brightness/Contrast submenu”.
“CONTRAST ADJUST”:
When this item is selected, there will be
only the contrast icon with an adjustment indication bar under it between
the main menu area and the video signal mode. Press “+” button to
increase contrast. Press “-” to decrease. Press “OSD” button to save the
current setting and return to “Brightness/Contrast submenu”.
“EXIT”:
Return to “Main menu”.
“COLOR ADJUST SUBMENU”:
There are 4 icons in this submenu:
Press “OSD” button to select item or return to main menu. Press
“NXT” button to select among auto color adjust, auto RGB reset, Color balance
adjust and exit.
“AUTO COLOR ADJUST”:
Upon an “OSD” button press on this
icon the monitor will perform an automatic color adjustment and exits the
OSD window leaving 2 icons below at center of the screen. Press “NXT”
button to switch the selection. Press “OSD” button to make the choice.
“ACCEPT”:
Accept the adjustment setting.
“REJECT”:
Decline the adjustment setting and return to
previous setting.
