background image

 

 

Part 1 

 
 
 
 
 
 
 
 
 
 
 
 

FCC NOTICE

 

This  equipment  generates,  uses,  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the 
instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class 
A  digital  device  pursuant  to  subpart  J  of  Part  15  of  FCC  Rules,  which  are  designed  to  provide  reasonable  protection  against 
interference  when  operated  in  a  commercial  environment.  Operation  of  this  equipment  in  a  residential  area  is  likely  to  cause 
interference in which case the user at his own expense will be required to take whatever measures to correct the interference. 

 

WARRANTY LIMITS 

Warranty will terminate automatically when the machine is opened by any person other than the authorized technicians. The user 
should consult his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of 
this merchandise. The manufacturer is by no means responsible for any damage or hazard caused by improper application. 

 

ABOUT THIS MANUAL

 

This  manual  assists  the  user  to  utilize  the  Touch  Monitor  LM-2310/LM-2210.  This  product  provides  exquisite  touch  control 
capability over a stable and adjustable LCD monitor with minimal footprint. 

 

The manufacturer of the LM-2310/LM-2210 monitor heartily apologizes to the user for reserving the right to change or to modify 
this  manual  without  notice  due  to  the  rapid  and  constant  progress  and  improvement  on  science  and  technology.  The  user  may 
always obtain the most up to date information through any of our web sites: http://www.posiflex.com, http://www.posiflex.com.tw, 
http://www.posiflexusa.com.

 

 Copyright Posiflex Technology, Inc. 2012 

TRADE MARKS AND SERVICE MARKS 

POSIFLEX is a registered trademark of Posiflex Technology, Inc.  

Other brand and product names are trademarks and registered trademarks and service marks of their respective owners. 

I.  FEATURES 

 

LM-2310/LM-2210 is principally designed for Posiflex KS-series POS  

solutions 

 

10” LCD monitor with tilt adjustment for industrial and commercial use 

 

High quality TFT LCD panel. 

 

Easy maintenance structure allowing easy cleaning 

 

Super VGA monitor resolution up to 800 x 600 pixels 

 

Support power supply through LCD cable from Posiflex Terminal to  

operate without power adaptor 
 
 

LM-2310/2210

 

LCD Monitor

 

User’s Manual

 

Rev. Original 

P/N: 19610900010 

Summary of Contents for LM-2210










Reviews: