background image

 

Part 18 

SOUND PORTS 

The  audio  port  in  Jiva  system  supports  a  Microphone  in  and  a  stereo  line  out  jacks. 
There is a single channel internal audio amplifier in the output port to drive the 1 slim 
type speakers installed in the I/O area inside cable cover with 1 W audio power (For 
TP-8300/E  this  item  is  an  option).  Should  the  application  demand  for  higher  audio 
power, please first ask your dealer to disable the internal audio amplifier and connect 
the  amplifier  or  a  pair  of  speakers  with  booster  to  this  port.  Please  note  that  this 
modification should be handled by a qualified technical person only. 
 

TOUCH PANEL 

All  paragraphs  below  are  applicable  for  models  with  touch  panel  only.  The 
user of those  models  without  touch panel can ignore them  and consider this 
user’s manual ends here. 

Mouse Emulation 

The  touch  panel  in  Jiva  system  uses  USB  interface  as  standard.  Only  the 
optional  Infrared  type  touch  panel  uses  RS232  interface.  When  the  touch 
driver  is  properly  installed,  this  touch  panel  works  exactly  like  a  standard 
mouse except when the system is running under safe mode. 
 
The  mouse  emulation  functions  include:  left  button  click;  click,  drag  and 
drop; left button double click; right button click. The only deviations are: the 
system  can  give  a  beep  (or  not  to  beep)  on  each  touch;  a  right-click  sticky 
button is provided for the effect like clicking on the right button of a mouse. 

 

Posiflex USB Touch Manager 

A  program  named  “Posiflex  USB  Touch  Manager”  and  a  right-click  sticky 
button tool in the program group “Posiflex USB Touch Tools” is installed in 
the preloaded Windows system with a USB interface touch panel controller. 
This  program  can  also  be  obtained  by  download  from  the  POSIFLEX  web 
site. 
 

RS232 Touch Controller 

If the Jiva system purchased with the Infra Red type touch models, the touch 
controller  is  of  RS232  interface.  The  “Posiflex  Touch  Terminal  Manager” 
above  should  be  disregarded.  In  these  models,  the  COM4  port  of  the  TP-
8300/E  will  be  covered  in  the  connection  area. 

Removal  of  this  cover  will 

void the product warranty!! 
 

Summary of Contents for Jiva - E




















Reviews: