PosiPin 7
TRANSFER LIMIT FOR 4-BITS BUFFERED FORMAT
Section [003]
[003]
[003]
[003] - Default: [00]
[00]
[00]
[00]
This feature sets the number of digits retained in memory before
the data is sent to the controller. For example, if section
[003]
is set
at 05, PosiPin will transmit once 5 digits are entered on the keypad.
This feature only applies when the format programmed in
Section
[002]
is set for Option
[5]
: 4 bits buffered without
parity or Option
[6]
: 4 bits buffered with parity.
DISPLAY ON CARD READ
Section [004]
[004]
[004]
[004] - Default: [3]
[3]
[3]
[3]
PosiPin’s response to a card being presented to the reader can be
adjusted according to the installation’s requirements.
Enter
Description
[01] to [11]
If section
[002]
is Option
[5]
: 4 bits buffered
without parity
[01] to [10]
If section
[002]
is Option
[6]
: 4 bits buffered with
parity.
Enter
Description
[0]
Display on Card Read disabled
[1]
Red Status LED flashes
[2]
Green Status LED flashes
[3]
Red and green Status LEDs flash
[4]
Face Light flashes
[5]
Face Light and red Status LED flash
[6]
Face Light and green Status LED flash
[7]
Face Light and both Status LEDs flash
