12 Installation and Operating Instructions
RESETTING TO DEFAULT
To reset PosiPin to factory defaults, disconnect its power supply.
Press and hold the
[1]
and
[2]
keys simultaneously while re-
connecting its power supply.
CARD PRESENTATION TEST
Present the card to the reader as shown in the figure below. Place
the card parallel to the PosiPin reader and move it toward the
reader until the card code displays on the controller screen. At this
point, the card is read, decoded, data transmitted to the controller
and the controller has responded accordingly. To read the card
again, remove and re-insert the card into the reader's field.
