SERVICE MANUAL
Page 14
Service manual Je
ts
tr
eam Mk3 - V
. 1.0 - 11-02-08 Appr
ov
ed by: JN
JETSTREAM Mk3
7. DISASSEMBLY INSTRUCTIONS - FIRST STAGE
A service includes the following 5 steps:
1.
Complete disassembly of the first stage.
2.
Inspection of disassembled parts.
3.
Cleaning prior to assembly.
4. Assembly.
5.
Final inspection and adjustment.
Do not disassemble the regulator in the clean room environment. All parts shall be
taken to the clean room environment after inspection and after the pre-cleaning process
if such is needed. Otherwise you risk to contaminate the clean room environment. New
parts should be stored in it’s original packing until it is time for assembly.
To remove o-rings, ONLY use o-ring remover tool 2297. Make sure not to damage
o-ring and sealing surfaces!!
Step Parts
Tools/Instructions
Replace Picture
1
2680 Blindscrew UNF 7/16” 2 pcs
2679 Blindscrew UNF 3/8” 5 pcs
2
4568 Screw M3x10 Xstream 3 pcs
3
0000-140 Cover Xstream first
stage satin
4
4763 Press. spring 1.stage
Xstream
6
5
4565 Pressure plate 1.stage
Xstream
