Posch M6140, Operating Instructions Manual

Page: 23 / 32

Changing procedure:
1
2
1
1 Ventilation screw 2 Oil sight glass
▪ Retract the splitting blade before changing the oil.
▪ Remove the ventilation screw.
▪ Tip the machine backwards.
▪ Drain the old hydraulic oil into a container.
▪ Screw the oil drain screw back into the tank and fill with new hydraulic oil.
▪ Turn on the machine and allow it to run for a short while.
▪ Check the oil level and top up hydraulic oil if necessary.
Total filling capacity of the hydraulic system:
Quantity
5 litres
Our hydraulic system is filled with OMV HLP M10 hydraulic oil.
This high-quality oil comes highly recommended when changing the oil.
A mixture of products of the same quality poses no problem.
Recommended hydraulic oils
Manufacturer Oil specification
OMV HYD HLP M10
SHELL Tellus T 15
ELF Hydrelf 10
ESSO Nuto H10
CASTROL Hyspin AWH 10
ARAL Vitam DE10
GENOL HLP 10
FUCHS Renolin B3
*.....biological hydraulic oils
9.2.1.1
Maintenance
23