Troubleshooting
WADE-8079 User’s Manual
5-1
Chapter 5
Troubleshooting
This chapter provides a few useful tips to quickly get WADE-8079 running with
success. As basic hardware installation has been addressed in Chapter 2, this chapter
will primarily focus on system integration issues, in terms of BIOS setting, and OS
diagnostics.
5.1
Hardware Quick Installation
ATX Power Setting
Unlike other Single board computer, WADE-8079 supports a Power adaptor only.
Therefore, there is no other setting that really needs to be set up. However, there is 12
/ 24V DC Jack – J3 on the WADE-8079 board.
12 / 24V DC Jack – J3
Serial ATA
Unlike IDE bus, each Serial ATA channel can only connect to one SATA hard disk at a
time;
The installation of Serial ATA is simpler and easier than IDE, because SATA hard
disk doesn’t require setting up Master and Slave, which can reduce mistake of
hardware installation.
The WADE-8079 can support two SATA interface (SATAII, 3.0 Gb/s) with IDE or
AHCI mode. It has two J16 & J19 SATA ports on the board.
