Troubleshooting
B786B270
DVI-I to DVI-D + VGA Y Cable.
5.4 FAQ
Symptom: SBC keeps beeping, and no screen has shown.
Solution: In fact, each beep sound represents different definition of error message.
Please refer to table as following:
Beep sounds
Meaning
Action
One long beep with one
short beeps
DRAM error
Change DRAM or reinstall it
One long beep constantly DRAM error
Change DRAM or reinstall it
One long beep with two
short beeps
Monitor or Display
Card error
Please check Monitor connector
whether it inserts properly
Beep rapidly
Power error warning Please check Power mode setting
Installation Problem
Question: How do I connect my keyboard and mouse, as there is only one
connector?
Answer: Users may always adopt PS/2 keyboard and mouse over the PS/2 interface,
J3 on WADE-8066.
Information & Support
Question: Intel GME965 series Chipset supports Dual Channel Mode, but how can
I enable this function?
Answer: you don’t have to change any setting. You can simply plug in two DDR2
SO-DIMM Modules, and then system will automatically enable Dual
Channel Mode.
WADE-8066 User’s Manual
5-5
