BIOS Setup Information
SuperIO Device
Phoenix- AwardBIOS CMOS Setup Utility
SuperIO Device
Item Help
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Serial Port 2
[2F8/IRQ3]
UART Mode Select [Normal]
X RxD , TxD Active
Hi , Lo
X IR Transmission Delay
Enable
X UR2 Duplex Mode
Half
XUse IR Pins
IR-Rx2Tx2
PWRON After PWR-Fail
[Off]
Menu Level
f
↑↓→←
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and second serial ports.
The choice: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto.
UART Mode Select
This item allows users to select Infrared transmission mode.
IrDA
Select IrDA mode transmission
ASKIR
Select ASKIR mode transmission
Normal
Disable Infrared function
RxD, TxD Active
This item is to configure Infrared transmission rate. Four options are available:
Hi, Hi
High rate for receiving / High rate for transmitting
Hi, Lo
High rate for receiving / Low rate for transmitting
Lo, Hi
Low rate for receiving / High rate for transmitting
Lo, Lo
Low rate for receiving / Low rate for transmitting
IR Transmission Delay
This option will be available when IR is enabled.
The choice: Enabled, Disabled.
WADE-8066 User’s Manual
4-14
