BIOS Setup Information
WADE-8011/WADE-8012 User’s Manual
4-26
Fast Boot
Enables or disables boot with initialization of a minimal set of devices required to
launch active boot option. Has no effect for BBS boot options.
Choices: Disabled, Enabled.
GateA20 Active
UPON REQUEST – GA20 can be disabled using BIOS services. ALWAYS – do not
allow disabling GA20; this option is useful when any RT code is executed above 1MB.
Choices: Upon Request, Always.
Option ROM Messages
Set Display mode for Option ROM.
This item is used to determine the display mode when an optional ROM is initialized
during POST. When set to [Force BIOS], the display mode used by AMI BIOS is used.
Select [Keep Current] if you want to use the display mode of optional ROM.
Choices: Force BIOS, Keep Current.
Interrupt 19 Capture
Enabled: Allows Option ROMs to trap Int 19.
Interrupt 19 is the software interrupt that handles the boot disk function. When
Enabled, this BIOS feature allows the ROM BIOS of these host adaptors to "capture"
Interrupt 19 during the boot process so that drives attached to these adaptors can
function as bootable disks. In addition, it allows you to gain access to the host
adaptor's ROM setup utility, if one is available.
When Disabled, the ROM BIOS of these host adaptors will not be able to "capture"
Interrupt 19. Therefore, you will not be able to boot operating systems from any
bootable disks attached to these host adaptors. Nor will you be able to gain access to
their ROM setup utilities.
Choices: Disabled, Enabled.
Boot Option #1
Sets the system boot order.
Choices: Built-in EFI Shell, other bootable devices, Disabled.
