BIOS Setup Information
ROBO-8910VG2A User’s Manual
4-17
Phoenix- AwardBIOS CMOS Setup Utility
Super IO Device
Item Help
POWER ON Function
[BUTTON ONLY]
X KB Power ON Password
Enter
X Hot Key Power ON
Ctrl-F1
Onboard FDC Controller
[Enabled]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Serial Port 2
[2F8/IRQ3]
UART Mode Select
[Normal]
X RxD, TxD Active
Hi, Lo
X IR Transmission Delay
Enabled
X UR2 Duplex Mode
Half
X Use IR Pins
IR-Rx2Tx2
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[SPP]
X EPP Mode Select
EPP1.7
X ECP Mode Use DMA
3
PWRON After PWR-Fail
[Off]
Menu Level
f
↑↓→←
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Power On Function
This item allows you to select different power on scheme using ATX power supply
.
Password
Power on using customized password string
Hot Key
Power on using special customized key
Mouse Left
Power on using mouse left click
Mouse Right
Power on using mouse right click
Any Key
Power on using any keyboard key
Button Only
Power on by power Button
Keyboard 98
Power on by keyboard 98 [Only power ON/OFF key]
Onboard FDC Controller
This item allows you to enable/disable onboard Floppy disk controller.
The choice: Enabled, Disabled.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and second serial ports.
The choice: 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled, Auto.
