BIOS Setup Information
ROBO-8779VG2AR User’s Manual
4-31
USB Functions
This setting specifies the function of the onboard USB controller.
The choice: Disabled, 2 USB Ports, 4 USB Ports, 6 USB Ports, 8 USB Ports, 10 USB
Ports, 12 USB Ports.
USB Port Configure
The choice: 6x6 USB Ports, 8x4 USB Ports.
USB 2.0 Controller
Set to [Enabled] if you need to use any USB 2.0 device in the operating system that
does not support or have any USB 2.0 driver installed, such as DOS and SCO Unix.
GbE Controller
This setting Enable the onboard Gigabit Ethernet controller.
GbE LAN Boot
When [Enabled], the BIOS attempts to boot from a LAN boot image before it
attempts to boot from a local storage device.
The choice: Disabled, Enabled.
GbE Wake Up From S5
This field specifies whether the system will be awakened from the S5 power saving
mode when activity or input signal of onboard LAN is detected.
The choice: Disabled, Enabled.
HDA Controller
This setting controls the High Definition Audio interface integrated in the
Southbridge.
The choice: Disabled, Enabled.
SMBUS Controller
The choice: Disabled, Enabled.
SLP_S4# Min. Assertion Width
The choice: 4 to 5 seconds, 3to 4 seconds, 2 to seconds, 1 to 2 seconds.
