System Overview
ROBO-8779VG2AR User’s Manual
1-2
1.2 Check
List
The ROBO-8779VG2AR package should cover the following basic items:
One ROBO-8779VG2AR single board computer
Two SATA 300 cable
One 4-pin ATX power control cable for backplane connection
One FDD and Parallel ports with bracket
Dual COM port cable with bracket
One Installation Resources CD-Title
If any of these items is damaged or missing, please contact your vendor and keep all
packing materials for future replacement and maintenance.
1.3 Product
Specification
Main processor
- Intel
®
Core 2 Quad / Core 2 Duo/ Celeron
®
Processor
- FSB: 1,333/1,066/800MHz
BIOS
AMI BIOS
Main Memory
- Support dual-channel & signal channel DDR3 memory interface
- Non-ECC, non-buffered DIMMS only
- Two DIMM sockets support 1,066/800 DDR3-SDRAM up to 4GB System
Memory
Chipset
Intel
®
G41 GMCH and ICH7R chipset
Bus Interface
-Follow PICMG 1.0 Rev 2.0 standard (32-bit PCI and 16-bit ISA)
-Fully complies with PCI Local Bus specification V2.2 (support 4 master PCI
slots)
-Support ISA function via Winbond PCI to ISA bridge W83628AG and
W83629AG
Floppy Drive Interface
Support one FDD port up to two floppy drives and 5-1/4"(360K, 1.2MB), 3-1/2"
(720K, 1.2MB, 1.44MB, 2.88MB) diskette format and 3-mode FDD
Serial Ports
Support two serial ports, one is RS232, the other is RS232/422/485 selectable.
Parallel Port
Support one parallel port with SPP, EPP and ECP modes
