System Overview
ROBO-8773VG User’s Manual
1-2
1.2 Check
List
The ROBO-8773VG package should cover the following basic items:
One ROBO-8773VG single board computer
One dual Serial ports cable kit
One Parallel port cable kit (2.0mm pitch)
One FDC cable (2.0mm pitch)
One IDE cable
One Y-cable cable for PS/2 keyboard and mouse
One 4-pin ATX power control cable for backplane connection
One 7-pin SATA signal cable
One Installation Resources CD-Title
One booklet of ROBO-8773VG manual
If any of these items is damaged or missing, please contact your vendor and keep all
packing materials for future replacement and maintenance.
1.3 Product
Specification
Main processor
- Intel
®
Pentium
®
4/Pentium
®
D/Celeron D Processor in LGA 775 package
- FSB: 800/533MHz
BIOS
Phoenix (Award) system BIOS with 4Mb Flash ROM with easy upgrade function
ACPI, DMI, Green function and Plug and Play Compatible
Main Memory
- Support dual-channel & signal channel DDR memory interface
- Non-ECC, non-buffered DIMMS only
- Two DIMM sockets support 400/333/266 DDR-SDRAM up to 2GB System
Memory
L2 Cache Memory
Built-in processor
Chipset
Intel 865G GMCH/MCH and ICH5 chipset
Bus Interface
- Follow PICMG 1.0 Rev 2.0 standard (32-bit PCI and 16-bit ISA)
- Fully complies with PCI Local Bus specification V2.2 (support 4 master PCI
slots)
PCI IDE Interface
Support two enhanced IDE ports up to four HDD devices with PIO mode 4 and
Ultra DMA/33/66/100 mode transfer and Bus Master feature
