BIOS Setup Information
ROBO-8773VG User’s Manual
4-13
4.7 Integrated
Peripherals
Phoenix- AwardBIOS CMOS Setup Utility
Integrated Peripherals
Item Help
f
OnChip IDE Device
[Press Enter]
f
Onboard Device
[Press Enter]
f
Super IO Device
[Press Enter]
Menu Level
f
↑↓→←
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Phoenix- AwardBIOS CMOS Setup Utility
OnChip IDE Device
Item Help
IDE HDD Block Mode
[Enabled]
IDE DMA transfer access
[Enabled]
On-Chip Primary PCI IDE
[Enabled]
IDE Primary Master PIO
[Auto]
IDE Primary Slave PIO
[Auto]
IDE Primary Master UDMA
[Auto]
IDE Primary Slave UDMA
[Auto]
On-Chip Secondary PCI IDE
[Enabled]
IDE Secondary Master PIO
[Auto]
IDE Secondary Slave PIO
[Auto]
IDE Secondary Master UDMA [Auto]
IDE Secondary Slave UDMA
[Auto]
*** On-Chip Serial ATA Setting ***
On-Chip Serial ATA
[Disabled]
X Serial ATA Port0 Mode
[Primary Master]
Serial ATA Port1 Mode
[Primary Slave]
Menu Level
f
If your IDE hard drive
supports block mode select
Enabled for automatic
detection of the optimal
number of block
read/writes per sector the
drive can support.
↑↓→←
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Note:
If user changes “On Chip Serial ATA default to become Enhance Mode”, you will
perceive that shadow item could be selectable.
IDE HDD Block Mode
If IDE hard drive supports block mode select Enabled for automatic detection of the
optimal number of block read/writes per sector the drive can support.
The choice: Enabled, Disabled.
