BIOS Setup Information
ROBO-679 User’s Manual
4-4
Item
Options
Description
Drive A
Drive B
None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
Select the type of floppy disk drive installed
in your system
Floppy 3 Mode Support
Disabled
Drive A
Drive B
Both
Select which drive you would like to set to
floppy 3 mode.
Video
EGA/VGA
CGA 40
CGA 80
MONO
Select the default video device
Halt On
All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
Select the situation in which you want the
BIOS to stop the POST process and notify
you
Base Memory
N/A
Displays the amount of conventional memory
detected during boot up
Extended Memory
N/A
Displays the amount of extended memory
detected during boot up
Total Memory
N/A
Displays the total memory available in the
system
4.4 IDE Adaptors Setup Menu
The IDE adapters control the IDE devices, such as hard disk drive or cdrom drive.
It uses a separate sub menu to configure each hard disk drive.
Screen shot
CMOS Setup Utility – Copyright © 1984-2001 Award Software
IDE Primary Master
IDE HDD Auto-Detection Press Enter
IDE Primary Master Auto
Access Mode Auto
Cylinder 20491 MB
Cylinder 39703
Head 16
Precomp 0
Landing Zone 39702
Sector 63
Item Help
____________________________________
Menu Level
To auto-detect the HDD’s size, head...
on this channel
↑↓←→
Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
StockCheck.com