Introduction
ROBO-603 User’s Manual
1-16
1.4.13
Compact Flash Interface
A Compact Flash type II connector is connected to the secondary IDE controller. The Compact
Flash storage card is IDE compatible. It is an ideal replacement for standard IDE hard drives. The
solid-state design offers no seek errors even under extreme shock and vibration conditions. The
Compact Flash storage card is extremely small and highly suitable for rugged environments, thus
providing an excellent solution for mobile applications with space limitations. It is fully compatible
with all consumer applications designed for data storage PC card, PDA, and Smart Cellular Phones,
allowing simple use for the end user. The Compact Flash storage card is O/S independent, thus
offering an optimal solution for embedded systems operating in non-standard computing
environments. The Compact Flash storage card is IDE compatible and offers various capacities.
1.4.14
Panel Link Interface (Optional)
The SiI164 transmitter uses PanelLink® Digital technology to support displays ranging from VGA
to UXGA resolutions (25 - 165Mpps) in a single link interface. The SiI164 transmitter has a highly
flexible interface with either a 12-bit mode (½ pixel per clock edge) or 24-bit mode 1-pixel/clock
input for true color (16.7 million) support. In 24-bit mode, the SiI164 supports single or dual edge
clocking. In 12-bit mode, the SiI164 supports dual edge single clocking or single edge dual clocking.
The SiI164 can be programmed though an I2C interface. The SiI164 support Receiver and Hot Plug
Detection.
PanelLink Digital technology simplifies PC design by resolving many of the system level issues
associated with high-speed mixed signal design, providing the system designer with a digital
interface solution that is quicker to market and lower in cost.
