User’s Manual
48
ECM-3410/3410L/3410N User’s Manual
4.5.2.4 Primary Master/Primary Slave/Secondary Master/Secondary Slave
The categories identify the types of 2 channels that have been installed in the computer.
There are 45 predefined types and 4 user definable types are for Enhanced IDE BIOS.
Type 1 to Type 45 are predefined. Type user is user-definable.
Press PgUp or PgDn to select a numbered hard disk type or type the number and press
<Enter>. Note that the specifications of your drive must match with the drive table. The
hard disk will not work properly if you enter improper information for this category. If your
hard disk drive type is not matched or listed, you can use Type “User” to define your own
drive type manually.
If you select Type “User”, you will need to know the information listed below. Enter the
information directly from the keyboard and press <Enter>. This information should be
included in the documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is ESDI, the selection shall be “Type 1”.
If the controller of HDD interface is SCSI, the selection shall be “None”.
If you select Type “Auto”, BIOS will Auto-Detect the HDD & CD-ROM Drive at the POST
stage and showing the IDE for HDD & CD-ROM Drive.
TYPE
drive type
CYLS.
number of cylinders
HEADS
number of heads
PRECOMP
write precomp
LANDZONE
landing zone
SECTORS
number of sectors
MODE
mode type
If a hard disk has not been installed select NONE and press <Enter>.
4.5.2.5 Drive A Type / Drive B Type
The category identifies the types of floppy disk drive A or drive B that have been installed in
the computer.
None
No floppy drive installed
360K, 5.25 in
5-1/4 inch PC-type standard drive; 360 kilobyte capacity
1.2M, 5.25 in
5-1/4 inch AT-type high-density drive; 1.2 megabyte capacity
720K, 3.5 in
3-1/2 inch double-sided drive; 720 kilobyte capacity
1.44M, 3.5 in
3-1/2 inch double-sided drive; 1.44 megabyte capacity
2.88M, 3.5 in
3-1/2 inch double-sided drive; 2.88 megabyte capacity
