ECM-3410/3410L/3410N
ECM-3410/3410L/3410N User’s Manual
115
Code (Hex)
Name
Description
31
Test Base and Extended Memory
Test base memory from 256K to 640K Extended
Memory and extended memory above 1MB using
various patterns.
NOTE: This test is skipped in EISA mode and can be
skipped with ESC key in ISA mode.
32
Test EISA Extended Memory
If EISA Mode flag is set then test
EISA memory found in slots initialization.
NOTE: This test is skipped in ISA mode and can be
skipped with ESC key in EISA mode.
33-3B
Reserved
3C
Setup Enabled
3D
Initialize & Install Mouse
Detect if mouse is present, initialize mouse, install
interrupt vectors.
3E
Setup Cache Controller
Initialize cache controller.
3F
Reserved
BF
Chipset Initialization
PROGRAM CHIPSET REGISTERS WITH SETUP
VALUES.
40
Display virus protect disable or enable.
41
Initialize Floppy Drive & Controller
Initialize floppy disk drive controller and any drives.
42
Initialize Hard Drive & Controller
Initialize hard drive controller and any drives.
43
Detect & Initialize Serial / Parallel Ports
Initialize any serial and parallel ports (also game
port).
44
Reserved
45
Detect & Initialize Math Coprocessor
Initialize math coprocessor.
46
Reserved
47
Reserved
48-4D
Reserved
4E
Manufacturing POST Loop or Display
Messages
Reboot if Manufacturing POST Loop pin is set.
Otherwise display any messages (i.e., any non-fatal
errors that were detected during POST) and enter
Setup.
4F
Security Check
Ask password security (optional).
50
Write CMOS
Write all CMOS values back to RAM and clear
screen.
51
Pre-boot Enable
Enable parity checker.
Enable NMI, Enable cache before boot.
52
INITIALIZE OPTION ROMS
Initialize any option ROMs present from C8000h to
EFFFFh.
NOTE: When FSCAN option is enabled, ROMs
initialize from C8000h to F7FFFh.
53
Initialize Time Value
INITIALIZE TIME VALUE IN 40H: BIOS AREA.
