Portwell PEB-7706G2A, User Manual

Page: 90 / 120

PEB-7706G2A
User’s Manual 74
7.3.1 Managing the Array
Viewing Array Properties
1. From the manual, select the “Manage Arrays”
2. Select the array in the “List of array” and press “Enter” to view the
selected array properties
3. Press “Esc” to return to the previous menu
7.3.2 Deleting Arrays
1. From the manual, select the “Manage Arrays”
2. Select the array you want to delete, and press “Delete”
3. In the “Array Properties” dialog box, select “Delete” and press
“Enter”, then following warning message will be displayed:
4. To delete the partition table, choose which member: member #0,
member #1, both, none
5. Press “Esc” to return to the previous menu
7.3.3 Creating Arrays
Before creating arrays, please make sure that the disks for the array
already connected and installed in the system.
1.
Select “Create Array” from the setup main menu
2. Select the disks for the new array then press “Insert”. To deselect
any disk, highlight the disk then press “Delete”
3. Press “Enter” when both selected disks ready, then the Array Prop-
erties menu displays
4. In the Array Properties menu, select a type of array and press
“Enter”.
5. Type in a label of the created array and press “Enter”
6. For RAID 0, please select the desired stripe size from 16, 32, and
64 KB
7. Press “Done” when you finished
Warning! Deleting the array will render the array unusable.