Portwell PEB-7706G2A, User Manual

Page: 85 / 120

69 Chapter 6
6. Click "Finish" when you see the following message.
6.3 Using the OBS Hardware Doctor Utility
After completing the setup, all the OBS functions are permanently
enabled. When a monitored reading exceeds safe limits, a warning mes-
sage will be displayed and an error beep tone will activate to attract your
attention.
OBS Hardware Doctor will show an icon on the right side of the bottom
window bar. This icon is the "Terminate and Stay Resident" (TSR) icon.
It will permanently remain in the bottom window bar, and will activate
warning signals when triggered by the onboard security system.
You can view or change values for various OBS settings by running this
utility:
1.
From the desktop of Windows, click on "Start" and select "Pro-
grams", select "Winbond HWDoctor" and click "HWDOCTOR."
2. It is recommended that you load the default values for all the OBS
settings. If desired, you can establish new conditions for volt-
age,fan speed,and temperature voltage, fan speed, and temperature.