Portwell PEB-7706G2A, User Manual

Page: 76 / 120

PEB-7706G2A
User’s Manual 60
Chapter 5 LAN Configuration
5.1 Introduction
The
PEB-7706G2A
features the 32-bit 10/100/1000 Mbps Ethernet network
interface. This interface supports bus mastering architecture and auto-
negotiation features. Therefore standard twisted-pair cabling with RJ-45
connectors for 10 Mbps, 100 Mbps and 1000 Mbps connections can be
used. Extensive driver support for commonly-used network systems is
also provided.
5.2 Features
• Optional single/dual Intel 82547/82541 10/100/1000 Base-T Ethernet
LAN controller
• Supports Wake-on-LAN remote control function
• PCI Bus Master complies with PCI Rev. 2.2
• MAC & PHY (10/100/1000 Mbps) interfaces
• Complies with 1000Base-T, 100Base-TX, and 10Base-T applications
• Fully supports 1000Base-T, 100Base-TX, and 10Base-T operation
• Single RJ-45 connector gives auto-detection of 10 Mbps, 100 Mbps, or
1000 Mbps network data transfer rates and connected cable types
• Plug and Play
• Enhancements on ACPI & APM
• Complies with PCI Bus Power Management Interface Rev. 1.1
• ACPI Rev. 2.0, and Device Class Power Management Rev. 1.0