PEB-7600VG2A User’s Manual
Chapter 1 Hardware Configuration Setting
This chapter gives the definitions and shows the positions of jumpers, headers and connectors. All of
the configuration jumpers on PEB-7600VG2A SERIES are in the proper position. The default settings
shipped from factory are marked with an asterisk (
).
2.1 Jumpers
In general, jumpers on the Mini ITX are used to select options for certain features. Some of the
jumpers are designed to be user-configurable, allowing for system enhancement. The others are for testing
purpose only and should not be altered. To select any option, cover the jumper cap over (SHORT) or
remove (NC) it from the jumper pins according to the following instructions. Here, NC stands for “Not
Connect”.
2.2 Connectors
I/O peripheral devices will be connected to the interface connectors in (Figure 2-2) PEB-7600VG2A SERIES Connector
Locations.
２
