BIOS Setup Information
PEB-2131VG2A User’s Manual
4-21
Reset Configuration Data
Default is Disabled. Select Enabled to reset Extended System Configuration Data
(ESCD) when you exit Setup if you have installed a new add-on and the system
reconfiguration has caused such a serious conflict that the OS cannot boot.
The choice: Enabled, Disabled.
Resource Controlled By
BIOS can automatically configure the entire boot and plug and play compatible
devices. If set to Auto, IRQ DMA and memory base address fields can not be
selected, since BIOS automatically assigns them.
The choice: Auto (ESCD), Manual.
※
IRQ Resources
When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the interrupt.
The choice: Press Enter.
IRQ-3/IRQ-4/IRQ-5/IRQ-7/IRQ-9/IRQ-10/IRQ-11/IRQ-12/IRQ-14/IRQ-15
assigned to.
The choice: PCI Device, Reserved.
PCI/VGA Palette Snoop
Legacy ISA for devices compliant with the original PC AT bus specification, PCI PnP
for devices compliant with the plug and play standard whether designed for PCI bus
architecture.
The choice: Enabled, Disabled.
Maximum Payload Size.
Set maximum TLP payload size for the PCI Express device. The unit is byte.
Default 128.
The choice: 128, 256, 512, 1024, 2048, 4096.
