System Installation
PEB-2131VG2A User’s Manual
3-2
Note:
To maintain system stability, don’t change any of DRAM parameters in BIOS setup
to upgrade system performance without acquiring technical information.
Memory frequency / CPU FSB synchronization
PEB-2131VG2A supports different memory frequencies depending on the CPU front
side bus and the type of DDR2-SDRAM DIMM.
CPU FSB
Memory Frequency
533MHz 533/400MHz
3.3
Installing the Single Board Computer
To install your PEB-2131VG2A into standard chassis or proprietary environment,
please perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure memory module on right position
Step 3 : Place PEB-2131VG2A into the dedicated position in the system
Step 4 : Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that SBC is properly inserted and fixed by mechanism.
Note:
Please refer to section 3.3.1 to 3.3.4 to install INF/VGA/LAN/Audio drivers.
3.3.1
Chipset Component Driver
The chipset on PEB-2131VG2A is a new chipset that a few old operating systems
might not be able to recognize. To overcome this compatibility issue, for Windows
Operating Systems such as Windows 2000 /XP, please install its INF before any of
other Drivers are installed. You can find very easily this chipset component driver in
PEB-2131VG2A CD-title.
