NAR-5620 Series
User
’
s
Manual
5
SATA Interface
3 x Serial ATA connectors
Serial Ports:
Support two high-speed 16550C compatible UARTs with 16-byte T/R FIFOs
Support LCD/Key pad module (Portwell proprietary)
USB Interface:
Support two USB2.0 ports for high speed I/O peripheral devices
Auxiliary I/O Interfaces:
System reset switch, power okay LED and HDD LED interface
Power Input:
Support one AC input jack (power requirement: 110V ~ 220V auto switch)
PCI Slot:
One PCI slot for half-size PCI card
One PCI-X slot for half size PCI-X card
Ethernet:
Ethernet configuration is depends on combination of PCI and PCI-
Express modules. Basically NAR-5620-0100 is built with ABN-214A
PCI Ethernet board, which owns one x 32bit RJ-45 GbE port. Further
PCI-Express module should be available as listed in the table below:
System Model
32b GbE
Available max.
PCI-E GbE on slot-
1
Available max.
PCI-E GbE on
slot-2
NAR-5620-0100
1
4
2
NAR-5620-
1
4
4
NAR-5620-D243
1
4
4
Hardware Monitor:
Support on-board hardware monitor for
System voltages: Vcore, 1.4V, +5V and +12V
Environmental
Requirements:
Operating Temperature: 0°C ~ 40°C
Storage Temperature: - 20°C ~ 80°C
Relative Humidity: 5%
∼
95%, non-condensing
Dimension:
Chapter 2 Getting Started
This section describes how the hardware installation and system settings should be done.
2.1
Included Hardware
The following hardware is included in package:
NAR-5620 Communication Appliance System Board
One null serial port cable
2.2
Before You Begin
To prevent damage to any system board, it is important to handle it with care. The following
measures are generally sufficient to protect your equipment from static electricity discharge:
When handling the board, use a grounded wrist strap designed for static discharge elimination
and touch a grounded metal object before removing the board from the antistatic bag. Handle
