NAR-5620 Series
User
’
s
Manual
20
pressed ! )',0dh,0ah,'$'
PROMP_err2 db 0dh,0ah,' ***** "Reset-to-Default event latched by F/F " Failed. *****',0dh,0ah,'$'
PROMP_err3 db 0dh,0ah,' ***** "Clear Reset-to-Default F/F status " Failed. *****',0dh,0ah,'$'
PROMP_TEST_OK db ' <<..... PPAP-3753 RESET-TO-DEFAULT test OK .....>>',0dh,0ah,'$'
PROMP_TEST_fail db ' <<***** PPAP-3753 RESET-TO-DEFAULT test FAIL *****>>',0dh,0ah,'$'
PROMP_Qkey db 0dh,0ah,'Press "Q" key to stop test and return to DOS; or other key to go on next test.$'
GP_INV_OFFSET
db 2Ch ; The offset value from GPIOBASE
GPE0_STS_OFFSET
db 28h ; The offset value from PMBASE
GP_LVL2_OFFSET
db 38h ; The offset value from GPIOBASE
GP_IO_SEL2
db 34h ; The offset value from GPIOBASE
GP_LVL_OFFSET
db 0ch ; The offset value from GPIOBASE
GP_IO_SEL
db 04h ; The offset value from GPIOBASE
; EBX_bit[31..16] save PMBASE
( B0:D31:F0:Offset[40..43h])
; ECX_bit[31..16] save GPIOBASE ( B0:D31:F0:Offset[48..4Bh] )
.code
programstart:
mov ax,@data
mov ds,ax
lea dx,PROMP_2_CR_LF
mov ah,09h
int 21h
lea dx,PROMP1
mov ah,09h
int 21h
lea dx,PROMP_2_CR_LF
mov ah,09h
int 21h
