EUDA2 Series 12”/15”/18.5” Panel PC User’s Manual (ver2.1) 20
Fig.5-32:External AC/DC 12V/60W adapter
Fig.5-33:Power adaptor to 3 pin terminal block cable
Electrical Specifications for the AC/DC Adapter
AC Input
DC Output
90-264V
1.5A
；
50-60Hz
12V DC
5A
For connecting to the system and power refer to “Connecting to Power”.
Cable Out: Non-Shielded, with one ferrite core bonded.
5.8. Accessing Internal Components
This section contains important information that you must read before accessing the internal components. You
must follow these procedures properly when handling any board components of the system.
Before removing the cover of the EUDA2 Panel PC Series system, EUDA2-S1220/EUDA2-S1520/
EUDA2-S1821, in order to gain access to the internal components, the system must be powered-down
and the power cord has to be disconnected from the power source.
The system may only be opened in accordance with the description in this user’s manual for: Configuration of
the RS232/ RS422 / RS485 interface. (Refer to COM port mode by BIOS setting)
These procedures have to be carried-out only by a qualified specialist.
It is not allowed to operate the system without installed cover.
Please observe the safety instruction for handling assemblies with static sensitive device. Failure to
take heed of this warning instruction can result in damage to the device.
