Portwell AMDY-7002, User Manual

Page: 26 / 60

System Installation
AMDY-7002 User’s Manual 3-1
Chapter 3
System Installation
This chapter provides you with instructions to set up your system. The additional
information is enclosed to help you set up onboard PCI device and handle Watch Dog
Timer (WDT) and operation of GPIO in software programming.
3.1 AMD G-Series FT1 Processors
The AMDY-7002 supports AMD G-Series FT1 (FCBGA-413) CPU. It provides very
low TDP for different applications that need fan-less. It is using latest AMD G-Series
Processor. Please see attached table for more detail.
The core logic chipset is AMD A55E ECH. From 2011, this 2-chips new platform
will be main-stream for next generation AMD platform architecture.
All the AMD FT1 CPU and ECH chipset are in AMD embedded roadmap that has
longevity support at least 2016.
AMDY-7002-T56N
․
1.6GHz, Dual Core, Dual LAN with CFAST and
Express mini-card socket, 8 COM, single DP to LVDS
(DP0), with DVI
AMDY-7002-T56N-
D
․
1.6GHz, Dual Core, Dual LAN with CFAST and Express
mini-card socket, 8 COM , with dual
DP to LVDS, NO DVI
3.2 Main Memory
AMDY-7002 provide 1 x 204-pin SO-DIMM sockets which supports 1066/1333
DDR3-SDRAM as main memory, Non-ECC (Error Checking and Correcting),
non-register functions. The maximum memory size can be up to 4GB capacity.
Memory clock and related settings can be detected by BIOS via SPD interface.
For system compatibility and stability, do not use memory module without brand.
Memory configuration can be either one double-sided DIMM in either one DIMM
socket or two single-sided SO-DIMM in both sockets.
Watch out the contact and lock integrity of memory module with socket, it will
impact on the system reliability. Follow normal procedures to install memory module
into memory socket. Before locking, make sure that all modules have been fully
inserted into the card slots.