Portwell AMDY-7002, User Manual

Page: 27 / 60

System Installation
AMDY-7002 User’s Manual 3-2
3.3 Installing the Single Board Computer
To install your AMDY-7002 into standard chassis or proprietary environment, please
perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure CPU and memory module on right position
Step 3 : Place AMDY-7002 into the dedicated position in the system
Step 4 : Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that SBC is properly inserted and fixed by mechanism.
Note:
Please refer to section 3.3.1 to 3.3.4 to install INF/VGA/LAN/Audio drivers.
3.3.1 Chipset Component Driver
The chipset on AMDY-7002 is a new chipset that a few old operating systems might
not be able to recognize. To overcome this compatibility issue, for Windows
Operating Systems such as Windows XP /WIN7, please install its INF before any of
other Drivers are installed. You can find very easily this chipset component driver in
AMDY-7002 CD-title.
3.3.2 Integrated Graphics
AMDY-7002 has APU integrated next generation HD6320 DX11 discrete GPU. The
graphic memory is shared from system memory (UMA), max is TBD.
Drivers Support
Please find driver in the AMDY-7002 CD-title. Drivers support Windows XP,
Windows 7.
3.3.3 Realtek Gigabit Ethernet Controller
Drivers Support
Two Gigabit Ethernet controllers are supported on AMDY-7002 Series. Both Ethernet
need to be PCIEx1 interface and support above functionality:
z PXE, Boot from LAN, can be disabled by BIOS individually.
z WOL, Wake on LAN, can be disabled by BIOS individually.
z Support 10/100/1000 access.
z Link / Access LED (Green), Speed LED (Black-10, Green-100, Orange-1000). If
LAN cable not installed, all LED need to be turn off.