In Commercial Confidence
7
C. MAIN INTERFACE
The following is the brief Button Description for main interface:
(1) Initialize: clear all saved parameters in TLU100N.
(2) Request All: request all parameters that is saved previously in TLU100N
(3) Request: request parameters in the current page
(4) Apply: set the parameters in the current page
(5) Apply All: save all the parameters into TLU100N
(6) Load: load the saved configuration file (*.ptm)
(7) Save: save the parameters into a files (*.ptm).
(8) Exit: exit the PC-Setup program; the system will exit the PC setup mode and enter the working mode.
1. [User detail]:
(1) Set Device ID for TLU100N. The TLU100N ID should be 4 to 8 decimal digitals characters. And the device ID must
be unique in order to be identified by the server.
(2) Set Access Point Name (APN), User Name (GPRS), Password (GPRS). Note that: The maximum length of the APN,
User name and Password is 49 characters. Some service provider does not require USER name or PASSWORD, hence,
user can leave blank in this section.
(3) “TCP/UDP” address and Port number of alarm center being set, TLU100N will send message to the IP address.
Note that: Only one TCP or UDP server will be used at a time.
(4) SMS communication number setting: The primary SMS number is the default number, e.g.: when a important event
can not send to user by internet then the report will send to user by this default number. The max SMS number is a limit
for allowed out SMS. And the renew date is be used as a judge when shall the unit clear all SMS stored in it.
(5) TLU100N can save 900 reports (899-0) recently; Click ‘Export’ button can export them into Excel or Notepad.
